PDiK gen.3 SA for Mancraft M4/AR15 bodies!
PRE-ORDER! Shipment June 2022
W 100% bezpieczna płatność
Wysyłka na cały świat
PDiK Gen.3 SL - it's The same PDiK as our beloved standard PDiK Gen1 but in bit different shape. This one can fit your Mancraft M4/AR15 without gearbox shell.
By the fact that's held in upper receiver and possibility to center it prerfectly with hop up unit (by rear skids & adjust screws) it will be always in center of barrell.
Pure mechanical/HP product?
Not allowed to have full auto mode?
NOW WITH NEW GENERATION OF TRIGGER VALVE!
PDIK - Pneumatic Drop in Kit standard- a set of components which allows converting a AEG rifle into gas-powered rifle. It is cheap and very effective method of upgrade.
Conversion kit was developed with the aim of sniper rifles - where is the need for long range and precision shot.
Conversion has independently movable nozzle - just like in the AEG rifles.Location of Nozzle is not directly linked to the location of the gas supply element. This solution makes that - when conversion taking a shot, nozzle (when the gas starts to move towards the ball) is stationary in the Hop Up chamber. Because of that, here is the better focus and precision of shot.
This type of nozzle has a great advantage - arranged axially relative to the eraser Hop Up. This solution makes the rubber is less worn and usually are better sealed with.
PDiK works in semi-auto mode. This is the only available mode in conversion kit.
The conversion is largely adapted to the needs of the sniper. Since it is possible here to get quite high fps - auto mode does not occur.
When using the appropriate regulator, it is possible to obtain a very stable, high fps. Power is adjusted by the regulator. Operational pressure is in the range 6-16bar.
- No electronics (resistance to weather conditions)
- No batteries
- Precision of the FPS
- No full auto mode - no worries about mad people with full auto;)
- Adjustable FPS
- Compatible with standard AEG parts (nozzle, trigger, selector plate)
- External power (many shots)
- Immediate response to the trigger
- No full auto mode
- External power (from a bottle)
Examples of the velocity (barrel length of 550mm, ball 0.2g):
8 bar - 150m / s (492fps)
10bar - 165m / s (541fps)
12bar - 182m / s (597fps)
16bar - 203m / s (666fps)
18bar - 213m / s (699fps)
- About 1.2m supply hose (fi 6mm)
PDiK Gen.3 SA require to have 27,4mm or more in diameter in upper receiver (27.4mm or more since there are positioning screws at the rear and positioning oring at the front)
The kit does not include:
- Rodzaj zasilania
- Dożywotnia gwarancja
Specyficzny nr. zamówienia